For Tandem Skydiving Rigs + 2 pairs of sexy stows from sexytowz.com
The Tandem CYPRES is specifically designed to be used on Tandem style skydives, thus the higher activation altitude to allow for the larger canopies being used. The descent rate for the activation is the same as with the Expert CYPRES (78mph / 35mps) but the default activation altitude is approximately 1900 ft (580m) AGL.
Additional safety for the Tandem Passenger and Pilot
|Cable length of control unit:||approx. 650 mm|
|Volume:||approx. 139 cm³|
|Weight:||approx. 198 grams|
|Activation altitude:||approx. 1900-130 feet (approx. 580 – 40 meter)|
|Activation speed:||approx > 78 mph (35 m/s)|
|Length, width, height of the processing unit:||approx. 85 x 43 x 32 mm|
|Length, width, height of the control unit:||approx. 65 x 18 x 6.5 mm|
|Length, diameter of the release unit:||approx. 43 x 8 mm|
|Cable length of the release unit (including release unit):||approx. 500 mm|
|Storage temperature:||+71° to -25° Celsius|
|Storage pressure:||200 to 1094 hPa ( 5.906 to 32.306 In.Hg)|
|Working temperature:||+63° to -20° Celsius*|
|Maximum allowable humidity:||up to 99.9 % rel. humidity|
|Waterproof:||up to 24 hours down to a depth of 8 feet (2.5 meters)|
|Dropzone offset adjustment limits:||±3000 feet or ±1000 m|
|Operating range below / above sea level:||-2140 feet to +26,000 feet (-650 m to +8000 m)|
|Functioning period:||14 hours from switch-on|
|Power supply:||service life warranty**|
For units with DOM 12/15 and earlier the maintenance is mandatory to be performed 4 and 8 years after the original DOM.
For units made in 2016 the maintenance can be performed on a voluntary basis 4 and 8 years after original DOM. Service Life is 12.5 years.***
For units with DOM 01/17 and later the maintenance can be performed on a voluntary basis 5 and 10 years after the original DOM. Service Life is 15.5 years.***
|Warranty Period:||see Airtec warranty policy|
|Service life:||DOM prior 01.01.2017: 12.5 years from date of manufacture
DOM later 01.01.2017: 15.5 years from date of manufacture
*These temperature limits do not mean the outside (ambient) temperatures but rather temperatures inside the processing unit. Therefore, these limits won‘t have any meaning until the processing unit itself has reached the temperatures in question. In actual fact, these limits will rarely be reached due to the location of the CYPRES in the reserve container, and the insulating properties of the processing unit pouch and parachute canopies.
** If maintenances have been performed within the scheduled time frames.
*** According to the present knowledge base.